基于BP神经网络的薄互层储层预测   总被引：1，自引：0，他引：1  

张大智  纪友亮  刘洪林 《上海国土资源》2005,(4):47-50,57

根据地震属性来进行储层预测的研究，对于寻找油气具有十分重要的意义。而由于地下地质情况千变万化，不确定的因素太多，对这种多自变量与因变量的复杂关系模拟问题，神经网络技术是目前较成熟、实际应用效果也较好的方法之一。用BP神经网络来预测薄互层储层厚度，它可以建立属性参数与预测目标之间的高度非线性映射，并应用于具体的实例，为薄互层储层预测提供了新的思路。  相似文献   

豫西南蒲塘金矿床地质特征及成因探讨   总被引：4，自引：0，他引：4  

庞绪成  张怀贵 《黄金地质》1997,3(4):49-54

蒲塘金矿床属爆破角砾岩型，主成矿期温度２３６～３１８℃，主矿体受爆破角砾岩筒控制，含矿围岩蚀变及矿体变化规律明显，黄铁矿及黄铜矿是金的主要载体矿物。矿石中Ａｕ－Ｃｕ含量呈正消长关系，成矿物质主要来源于花岗岩，从花岗岩的侵入到矿床的形成，大体上经过了晚燕山期浅成初始岩浆侵入－爆破，超浅成强烈爆破及热液成矿三个阶段。  相似文献   

复杂地质构造波动方程数值模拟   总被引：3，自引：2，他引：3  

单延明  吴清岭  于承业  王建民  陈斌 《物探化探计算技术》2002,24(1):24-26

利用全声波方程进行地震波场的数值模拟，虽然可以计算全声波波场值，但是也常常会出现层间多次波，给资料解释造成一定的困难。作者在本文中根据无反射声波方程，采用有限差分数值解法，实现了自激自收时间剖面的制作，避免了层间多次波的产生。本方法不但允许速度有纵向变化，而且允许速度有横向变化，这使得模拟复杂地质构造的地震响应成为可能。实际计算结果表明，该方法是一种行之有效的自激自收时间剖面的计算机数值模拟方法。  相似文献   

薄钢板剪力墙抗震性能试验研究   总被引：15，自引：6，他引：15  

苏幼坡  刘英利  王绍杰 《地震工程与工程振动》2002,22(4):81-84

通过4个薄钢板剪力墙和1个钢筋混凝土框架的试验，研究了薄钢板剪力墙在低周往复荷载作用下的刚度、承载力、延性和耗能性能。试验表明，利用薄钢板剪力墙在低周往复荷载作用下的刚度、承载力、延性和耗能性能。试验表明，利用薄钢板剪力墙作为抗侧力构件是可行的。在钢筋混凝土框架中设置薄钢板可有效地增加刚度，承载力和耗能性能。  相似文献   

东亚和西太平洋爆发性温带气旋发生的气候学研究   总被引：3，自引：1，他引：3       下载免费PDF全文

仪清菊  丁一汇 《大气科学》1993,17(3):302-309

本文利用历史天气图资料,对1973—1988年中国东部和沿海地区的温带气旋及其爆发性发展情况进行了统计,共有1014个温带气旋发生,其中有1/5达到了爆发性发展的强度,构成了西太平洋爆发性海洋气旋的一部分.它占整个西太平洋爆发性气旋总频数(包括不同来源)的51％.进而对这类爆发性气旋的活动规律进行了分析,概括出了它们的气候学特征.比较亚洲大陆、中国近海及西太平洋地区的爆发性温带气旋表明,西太平洋地区不仅频繁而且强烈.而东、西太平洋地区发生海洋爆发性气旋的对比表明,二者存在着明显的差异.同时也指出,东太平洋地区爆发性气旋的发生并不是一种少见的现象.  相似文献   

Pyroclastic phases of a rhyolitic dome-building eruption: Puketarata tuff ring,Taupo Volcanic Zone,New Zealand     

M R Brooker  B F Houghton  C J N Wilson  J A Gamble 《Bulletin of Volcanology》1993,55(6):395-406

The 14 ka Puketarata eruption of Maroa caldera in Taupo Volcanic Zone was a dome-related event in which the bulk of the 0.25 km³ of eruption products were emplaced as phreatomagmatic fall and surge deposits. A rhyolitic dike encountered shallow groundwater during emplacement along a NE-trending normal fault, leading to shallow-seated explosions characterised by low to moderate water/magma ratios. The eruption products consist of two lava domes, a proximal tuff ring, three phreatic collapse craters, and a widespread fall deposit. The pyroclastic deposits contain dominantly dense juvenile clasts and few foreign lithics, and relate to very shallow-level disruption of the growing dome and its feeder dike with relatively little involvement of country rock. The distal fall deposit, representing 88% of the eruption products is, despite its uniform appearance and apparently subplinian dispersal, a composite feature equivalent to numerous discrete proximal phreatomagmatic lapilli fall layers, each deposited from a short-lived eruption column. The Puketarata products are subdivided into four units related to successive phases of:(A) shallow lava intrusion and initial dome growth; (B) rapid growth and destruction of dome lobes; (C) slower, sustained dome growth and restriction of explosive disruption to the dome margins; and (D) post-dome withdrawal of magma and crater-collapse. Phase D was phreatic, phases A and C had moderate water: magma ratios, and phase B a low water: magma ratio. Dome extrusion was most rapid during phase B, but so was destruction, and hence dome growth was largely accomplished during phase C. The Puketarata eruption illustrates how vent geometry and the presence of groundwater may control the style of silicic volcanism. Early activity was dominated by these external influences and sustained dome growth only followed after effective exclusion of external water from newly emplaced magma.  相似文献   

A case of no-wind plinian fallout at Pululagua caldera (Ecuador): implications for models of clast dispersal     

Paolo Papale  Mauro Rosi 《Bulletin of Volcanology》1993,55(7):523-535

The caldera of Pululagua is an eruptive centre of the Northern Volcanic Zone of the South American volcanic arc, located about 15 km north of Quito, Ecuador. Activity leading to formation of the caldera occurred about 2450 b.p. as a series of volcanic episodes during which an estimated 5–6 km³ (DRE) of hornblende-bearing dacitic magma was erupted. A basal pumice-fall deposit covers more than 2.2x10⁴ km² with a volume of about 1.1 km³ and represents the principal and best-preserved plinian layer. Circular patterns of isopachs and pumice, lithic and Md isopleths of the Basal Fallout (BF) around the caldera indicate emplacement in wind-free conditions. Absence of wind is confirmed by an ubiquitous, normally graded, thin ash bed at the top of the lapilli layer which originated from slow settling of fines after cessation of the plinian column (co-plinian ash). The unusual atmospheric conditions during deposition make the BF deposit particularly suitable for the application and evaluation of pyroclast dispersal models. Application of the Carey and Sparks' (1986) model shows that whereas the 3.2-, 1.6-, and 0.8-cm lithic isopleths predict a model column height of about 36 km, the 6.4-cm isopleth yields and estimate of only 21 km. The 4.9- and 6.4-cm isopleths yield a column height of 28 km using the model of Wilson and Walker (1987). The two models give the same mass discharge rate of 2x10⁸ kg s^-1. A simple exponential decrease of thickness with distance, as proposed by Pyle (1989) for plinian falls, fits well with the BF. Exponential decrease of size with distance is followed by clasts less than about 3 cm, suggesting, in agreement with Wilson and Walker (1987), that only a small proportion of large clasts reach the top of the column. Variations with distance in clast distribution patterns imply that, in order to obtain column heights by clast dispersal models, the distribution should be known from both proximal and distal zones. Knowledge of only a few isopleths, irrespective of their distance from the vent, is not sufficient as seemed justified by the method of Pyle (1989).  相似文献   

Strain segmentation and lateral membrane deformation rate of the subducted Ryukyu slab     

LingYun  Chiao 《Island Arc》1993,2(2):94-103

Abstract Focal mechanisms of intermediate-depth earthquakes within the subducted Ryukyu slab indicate a systematic pattern of down-dip extension in the northern part under Kyushu. These mechanisms switch rapidly around the Tokara channel to down-dip compression in the southern part toward Taiwan. This intriguing pattern of strain segmentation, together with the differences between the slab geometry of the northern and southern parts, has raised the question of whether stress segmentation, as defined possibly by a tear fault, might exist in the slab. However the Ryukyu trench has a concave oceanward shape in the northern segment while it is convex in the southern oceanward part toward Taiwan. The inflection zone is located around the Tokara channel. The concept of Gaussian curvature of a curved surface suggests that the along-arc variation of the geometric configuration of a subducted slab is related to the shape of the trench. This is in order to accommodate the lateral membrane deformation of the slab as the oceanic lithosphere subducts from a spherical shell to the geometry delineated by the Wadati-Benioff zone. The membrane deformation regime of the subducted Ryukyu slab and its relation with the trench geometry was examined by assuming that the subduction be modelled by the flow field of a thin viscous sheet. A projection operator was utilized to compute the membrane strain-rate tensor of an arbitrary non-Euclidean surface. Numerical experiments indicated that the northern segment of the slab was dominated by lateral compression and down-dip extension and the southern part by lateral extension and down-dip compression. This transition is sharply located near the Tokara channel. These patterns were compatible with what had been observed from studies of focal mechanisms, suggesting that the strain segmentation might be controlled, at least in part, by the lateral membrane deformation within the slab due to the trench shape in this subduction zone. The slab geometry was predicted by minimizing the integrated total dissipation power; this revealed distinct features that were consistent with observations. This implies that the slab geometry may also be affected by the membrane deformation in a systematic fashion.  相似文献   

地震信息对薄砂岩储层特性的描述   总被引：1，自引：0，他引：1  

徐怀民  赵景龙 《地质论评》1993,39(5):433-441

近年来,以地震信息为主进行油气藏描述,这是当前对石油勘探的重点攻关课题.本文结合我国陆上和海域部分油田或含油气构造的实际资料,运用地震信息为主,结合测井、地质及钻井等资料,对储层进行综合解释。同时,提出了用多地震信息计算薄层厚度的基本公式,根据地区性岩性和地震资料的差异,使用了确定性地质统计和Coringing分析两种方法进行储层物性参数的预测,文中给出大量的实例说明各种储层参数描述方法和应用效果。  相似文献   

Frequency Effects of Fine Thin Layer     

Zhang Shuangxi 《中国地质大学学报(英文版)》1994,(1)

ＦｒｅｑｕｅｎｃｙＥｆｆｅｃｔｓｏｆＦｉｎｅＴｈｉｎＬａｙｅｒ￥ＺｈａｎｇＳｈｕａｎｇｘｉ（ＥｅｐａｒｔｍｅｎｔｏｆＧｅｏｐｈｙｓｉｃｓ，ＣｈｉｎａＵｎｉｖｅｒｓｉｔｙｏｆＧｅｏｓｃｉｅｎｃｅｓ，Ｗｕｈａｎ４３００７４）ＹｕａｎＴａｏ；ＺｈａｎｇＷｅ...  相似文献